The features of the Dreambox DM 7000-S:
- 250 MHz IBM PowerPC
Processor (350 Mips)
- Linux open source (most parts
under the terms of GPL, accordingly
expandable)- Supports Linux Standard API (Direct-FB, Linux-FB, LIRC)
- 1 x DVB Common-Interface
Slot
- 2 x Smartcard-Reader
- Integrated Compact Flash
Interface Slot
- MPEG2 Hardware decoding (fully DVB compliant)
- Common available NIMs (DVB-S, DVB-T, DVB-C)
- 100 MBit full duplex Ethernet Interface
- USB Port Keyboard, Pointing Devices, WebCams and
other devices
- V.24/RS232 Interface
- Big-size LCD-Display
- 64 MByte of RAM
- integrated IDE UDMA66 Master/Slave Interface
- Support for internal HDD in any capacity
Support for timeshift function
- unlimited channel lists for TV/Radio
- channel-change time < 1 second
- full automatic service scan
- supports directly bouquet-lists (indirect
unlimited)
- supports EPG (electronic program guide)
- supports videotext (insertion)
- various applications such Web-Browser or
Mail-clients
- supports multiple LNB-Switching control (supports
DiSEqC)
- fully adaptable OSD in many languages
(skin-support)
- SPDI/F Interface for digital bit stream out (AC-3
/ DTS)
- 2 x Scart-interfaces (fully controlled by
software)
- MINI-DIN connector for extern IR (send/receive)
and I2C for
extern Rotor devices
- intern send/receive IR (Videorecorder)
DreamBox DM7000 technical data
DBS-Tuner:
Frequency Range 950 …. 2150 MHz
Signal Level - 65 dBm …. - 25 dBm
Signal-to-Noise Level 12 dB max.
DBS-Tuner Input Connector F-Type female
Input Impedance 75 Ohm
AFC +/- 3 MHz
Demodulation Shaped QPSK
Input Symbol rate 2 …. 45 Mbaud/s, SCPC / MCPC
FEC Viterbi and Reed-Solomon
Viterbirate 1/2, 2/3, 3/4, 5/6, 7/8, automatic assimilation
Roll-off Factor 35 %
Demultiplexing according ISO 13818-1
Common-Interface:
Common-Interface Power
Consumption max. 0,3A/5V
Video decoder:
Video Compression MPEG-2 and
MPEG-1 compatible
Video Standard PAL G/ 25 Hz
Video Formats 4:3 / 16:9
Footage 16:9, automatic assimilation for 16:9 TV-Device (over Scart)
Letterbox precolating for 4:3 TV-Device
Audio decoder:
Audiokompression MPEG-1 & MPEG-2 Layer I and II
Audio Mode Dual (main/sub), Stereo
Frequency: 32 kHz, 44.1
kHz, 48 kHz, 16 kHz, 22.05 kHz, 24 kHz
Output analog:
Output Level L/R 0,5 Vss on 600
Ohm
THD > 60 dB (1 kHz)
Crosstalk < -65 dB
Output digital:
Output Level 0,5 Vss on 75 Ohm
Sampled Data
Filtering 32 kHz, 44.1
kHz, 48 kHz
S/PDIF-Output optical (AC3)
Video parameter:
Input Level FBAS 1 Vss +/- 0.3 dB
on 75 Ohm
Teletext filter in conformity with ETS 300 472 Standard
TV-Scart:
Output: FBAS,RGB,S-VHS over OSD selectable
VCR-Scart:
Input: FBAS
Output: FBAS
Serielle Interface RS 232:
Typ RS232 bidirectional
Bitrate 115,2 kBit/s max.
Plug Connector SUB-D-9
Function Update of Firmware and Preprogramming
Ethernet:
100 MBit compatible, bi-direktional interface
Function Update of Firmware and
Preprogramming
USB:
USB 1.2 connector
Mini DIN:
I2C for stearing of external devices (Option Rotor)
IR funktion
Pins:
1 5V
2 SDA (I2C-Kanal 2)
3 SCL
4 3,3V
7 GND
8 IR-Output
9 GND
UDMA66 IDE Interface:
Intern for connect HDD max. 500mA
Compact Flash - Reader
LNB power and polarisation:
LNB Current 500mA max. ;
short-circuit-proof
LNB Voltage vertical < 14V without load, > 11,5V at 400mA
LNB Voltage horizontal < 20V without load, > 17,3V at 400mA
LNB shut-off at Standby-Mode
Count of active satellite position:
DiSEqC 1.0/1.2 SAT
POSITION / SAT OPTION
DiSEqC - Rotor Control
Power consumption:
< 20W (in operation, horizontal polarization / 400mA LNB current)
< 11W (in operation, without LNB)
Input voltage:
230V / 50 Hz alternating acurrent +/- 15%
Physical specification:
Ambient Temperature +15°C...+35°C
Humidity < 80%
Size (W x D x H): 374 mm x 230 mm x 75 mm
Weight: 1,8 kg without HDD
Weight: 0,6 kg
|
